Contour Scanner (CS1)
The thickness of the powder coating must be at least between 60µm and 90µm per layer. With a primer and a topcoat, the thickness is at least 120-180µm.
When having an EPD coating, an extra 18-25µm is added.
The machines are not designed for cleanroom use.
EPD coating is a pretreatment before powder coating, which makes the coating more resistant to e.g. moisture environments.
Yes, the machine can be supplied with EPD (KTL) coating.
The requirements for the cartons are the same, both types of cartons should be closed properly without any loose or flapping lids.
However, taped cartons can have loose tape ends, so when working with them extra sensors are placed at higher positions to detect such cases.
Bearings we have installed do not need to be lubricated. Installed bearings are sealed bearings (ZZ and 2RS) and are factory-filled with grease. They cannot be re-lubricated. These bearings have a maintenance-free lifespan. Re-lubrication is not necessary; instead, in case of wear or reduced performance, the bearings should be replaced.
The machines are not suitable for ATEX environments. It has not been designed or certified for use in explosive atmospheres as defined by ATEX standards.
